EasyManua.ls Logo

Mitel Inter-Tel 5000 - Peripheral Equipment; Voice Processor; PC Specifications for Stand-Alone or Remote Programming; Smdr;Error Message Output

Mitel Inter-Tel 5000
468 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4: Specifications
Peripheral Equipment
Inter-Tel
®
5000 Installation Manual – Issue 2.4, May 2008 Page 4-59
Peripheral Equipment
The Inter-Tel 5000 platform supports peripheral, or external, equipment that provide
enhancements to the IP system’s basic business communication services. The following
sections describe equipment that can be attached to the platform.
Voice Processor
The Voice Processing Unit (VPU) runs on Windows 2000. The Enterprise Messaging (EM)
system runs either Windows 2000 or Windows 2000 Server. Both processors are installed on a
PC that is connected to the Inter-Tel system to provide integrated voice processing (voice mail,
automated attendant, hunt group announcement and overflow, buffered SMDR, optional Fax-
On-Demand, Record-A-Call, etc.). For installation instructions, see “Installing an External Voice
Processing System” on page 5-172. For operational details refer to the applicable manual:
Enterprise
®
Messaging Installation Manual, part no. 780.8006
Voice Processing Unit Installation Manual, part no. 835.2890
PC for On-Site or Stand-Alone/Remote Programming
A PC (personal computer) running Windows 2000 or Windows XP is required for on-site or for
stand-alone or remote programming. The PC specifications must meet or exceed the
specifications shown in the following information matrix.
For environmental requirements, see page 4-4.
SMDR/Error Message Output
Output data from SMDR and Error Message Recording features is accessed through an IP
socket defined on the Administrative Web Session. The output may be sent to a PC or to a
printer. For details, refer to the Inter-Tel 5000 Features and Programming Guide (part no.
580.8006).
Table 4-32. PC Specifications for Stand-Alone or Remote Programming
Minimum Requirement Recommended
Pentium II 266 MHz or later
microprocessor
Pentium III 500 MHz or later
microprocessor
32 MB RAM 128 MB RAM or more
100 MB free disk space to install
80–100 MB to run
100 MB free disk space to install
80–100 MB to run
VGA at 640x480 or greater 256-color display at 800x600 or greater
CD-ROM CD-ROM
Mouse Mouse

Table of Contents

Other manuals for Mitel Inter-Tel 5000

Related product manuals