Chapter 4: Specifications
CT Gateway
Page 4-60 Inter-Tel
®
5000 Installation Manual – Issue 2.4, May 2008
CT Gateway
System OAI Level 2 applications can be used in conjunction with the CT Gateway. The CT
Gateway provides a TCP/IP System OAI interface that supports a network. As far as the
System OAI streams are concerned, each node in a network functions individually. The user
cannot program a System OAI serial port on Node 1 that will control devices or receive events
for other nodes. If the user needs to control devices on multiple nodes, they must install a CT
Gateway. The CT Gateway receives the OAI streams from multiple nodes and consolidates
them into a single stream for a System OAI application. The CT Gateway sends and receives all
of its data via TCP/IP connections.
For details, refer to the CT Gateway Installation Manual, part no. 835.2161. For environmental
requirements, see page 4-4.
Additional Information
If necessary, contact the Inter-Tel CommSource division for additional information about the
following optional equipment:
• Standby Power (system battery back-up)
• Uninterruptible Power Supply (UPS)
• Lightning and AC Surge Protection
• Headsets
• Paging Equipment
• Single Line Endpoints
• Cordless Telephones
• Music-On-Hold
• OPX Repeaters
• Facsimile Machine
• Playback Devices
To Next Page
