Chapter 4: Specifications
Base Server
Page 4-18 Inter-Tel
®
5000 Installation Manual – Issue 2.4, May 2008
Base Server
The Inter-Tel 5000 Base Server houses the system processor module (PM-1) and the
Processor Expansion Card (PEC-1) for a CS-5400, the motherboard, and power supply.
Chassis Description
Table 4-11 summarizes the physical dimensions of Inter-Tel 5000 Base Server chassis.
The front of the chassis presents a two-row liquid crystal display (LCD) panel and a five-button
command-and-control interface for interacting with the system. The front of the chassis also
provides two Universal Serial Bus (USB) ports, a USB socket for a software license security
key, a bay that holds a compact flash-type Inter-Tel memory card, and a recessed ejection
button for extracting the card.
In addition to the PM-1 bay, the back of the chassis offers three bays that accept slide-in trunk
modules and the following six connection interfaces:
• The system power cord socket
• A 1/8th-inch jack for attaching an audio source to supply system Music-On-Hold and/or
Background Music
• An RCA-type phono jack for attaching an external paging unit
• A 6-pin socket for connecting two loop start trunks
• A 6-pin socket for connecting two single line endpoints.
Together, the loop start and single line circuits also provide the system’s power fail bypass
feature.
• A DB-15 connector for attaching peripheral equipment
• The Inter-Tel 5000 Base Server supports the following trunk circuit modules:
o Loop Start Module, 2-port (LSM-2)—Supported but no longer in production.
o Loop Start Module, 4-port (LSM-4)
o T1/E1/PRI Module, 1- port (T1M)
o Dual T1/E1/PRI Module, 2- port (T1M-2)
o Basic Rate Interface Module, 2-port (BRM-S) [European market only]
Table 4-11. Dimensions of Inter-Tel 5000 Base Server
Dimension Measurement (Metric)
Length 14.50 in. (36.83 cm)
Width 17.00 in. (43.18 cm)
Height 01.75 in. (4.45 cm) (1 U)
Weight 09.00 lb (4.08 kg)
To Next Page
Loading...
