Mitel Inter-Tel 5000 - Page 76

Chapter 4: Specifications
System Capacities
Page 4-14 Inter-Tel
®
5000 Installation Manual – Issue 2.4, May 2008
Dual Tone Multi-Frequency (DTMF) Resources
• Receivers 6 6 6
• Transmitters 4 4 4
Endpoints
See Table 4-10 on page 4-17.
Extension Lists
• Per system 100 100 100
• Endpoint or trunk numbers/list 100 100 250
• Endpoints/list used for Hunt Groups 30 60 60
• Endpoints/list used for Paging 30 30 60
Fax over IP (FoIP)—T.38
(Maximum simultaneous faxes
between Inter-Tel 5000 platforms only)
6 6 6
Forwarding Paths
• System total 200 200 200
• Paths per endpoint 3 3 3
• Points per path 4 4 4
Hunt Groups per system 75 75 300
Keymap Group Assignments
• Endpoint 25 25 25
• DSS/BLF (in Database Programming only) 20 20 20
• User-programmable buttons per endpoint 35 35 35
Loop Start Module
• Dual (LSM-2)—No longer in production. 3 3 3
• Quad (LSM-4) 3 3 3
Music On Hold port per system 1 1 1
Paging
• Port per system 1 1 1
• Zones per system 10 10 10
• Endpoints in a paging zone 30 30 60
Reminder Messages
• Programmable messages 20 20 20
• Message requests per system 75 175 250
Single-Line Adapter
• Per Digital Endpoint Module 16 16 16
• Per Digital Expansion Interface 48 48 48
• Per system, or node* 48–96 48–96 48–96
o *With 2 single line endpoints per SLA
48 48 48
o *With 1 single line endpoint per SLA
96 96 96
Table 4-8. System Capacities for Systems Running v2.4 and later (Continued)
Feature CS-5200 CS-5400 CS-5600