Index-5
EXTERNAL LATCHING FAULT INPUT 6-18
External Memory Mode 5-56–5-59
Extra Features Menu Options 5-48–5-53
F
FAN/LIGHT OUTPUT TIMER 5-27
FAULT BYPASS IS ACTIVE (AUTOMATIC) 6-18
FAULT BYPASS IS ACTIVE (INSPECTION) 6-18
FCCC, Fire Phase II Call Cancel Button Input 5-33
FCCC, Fire phase II car call cancel flag 5-11
FCHLD, Fire Phase II Door Hold Input 5-33
FCHLD, Fire phase II hold flag 5-11
FCOFF, Fire phase II off flag 5-11
FCOFF, Fire Phase II Switch OFF Position Input 5-33
FCS 6-41, 6-44
FCS, Fire phase II input flag 5-11
FCSM, Fire service phase II input memory flag 5-11
FDC, Door fully closed phase II flag 5-11
FDCR, Door fully closed phase II (rear) flag 5-11
final adjustments
door operator 4-7
final adjustments 4-7, 4-8
hydraulic valves 4-6
registering car calls 4-3, 5-69
slowdown and limit switches 4-6
test mode operation 4-4
testing hall calls 4-8
testing options 4-8
FIR1, Fire Service Phase I output 5-43
FIRE BYPASSES HOSPITAL option 5-52
FIRE PH1 RECLOSE TIMER 5-27
FIRE PHASE 1 ALT. FLOOR option 5-20
FIRE PHASE 1 MAIN FLOOR option 5-20
FIRE PHASE I 2ND ALT. FLOOR option 5-20
Fire Phase II OFF Input 5-43
Fire Service Alternate message 6-19
Fire Service Main message 6-19
Fire Service Menu options 5-20–??
Fire Service Operation 1-17
FIRE SERVICE OPERATION option 5-20
Fire Service Phase 1 - Main message 6-19
Fire Service Phase 1 -Alternate message 6-19
Fire Service Phase 2 message 6-19
FIRE SVCE. CODE option 5-20
Firmware version for all boards 5-106
Flags/Variables and Their Locations 5-9
FLASH, Flash Output 5-43
FLO, Fan/Light Operation Output 5-43
FLOOR ENCODING INPUTS? option 5-48
Floor Labels 5-67
Floor Labels, programming 5-67
FLR COUNT BELOW FLOOD LEVEL option 5-53
FRA 6-44
FRA, Alternate Fire service phase I input flag 5-11
FRAA, Fire Phase I Alternate (2nd alternate) Input 5-33
FRAON, Fire Phase I Alternate Switch ON Position Input
5-33
FRAS, Alternate fire flag 5-11
FRBYP, Fire phase I bypass input flag 5-11
FRBYP, Fire Phase I Switch BYPASS Position Input 5-33
FRC, Fire phase II flag 5-11
FRC, Fire Service Phase II Output 5-43
FRCT, True Fire Service Phase II Output 5-43
FREE, No demand and in service flag 5-11
FRES 6-44
FRHTW, Hoistway Fire Sensor input 5-33
FRM, Fire service phase I flag 5-11
FRM, Fire Service Phase I Output 5-43
FRMR, Machine Room Fire Sensor input 5-33
FRON 6-41, 6-44
FRON, Fire phase I on input flag 5-11
FRON, Fire Phase I Switch ON Position Input 5-33
FRON2, Fire Phase 1 Switch ON Position Input 5-33
Front DOL & DLK are Both Active message 6-19
FRONT DOOR CLOSE LIMITS option 5-55
FRONT DOOR FAILED TO CLOSE 6-19
Front Door is Locked but not fully closed message 6-19
Front Door Lock Switch Failure message 6-19
FRONT DOOR MECH. COUPLED option 5-25
Front Door Open Limit Failure message 6-19
Front Gate Switch Failure message 6-19
FRS 6-44
FRS, Fire phase I input flag 5-9
FRSA 6-44
FRSA, Alternate Fire Service input 5-33
FRSM 6-44
FRSM, Main Fire Service input 5-33
FRSS, Fire phase I flag 5-9
FSA, Fire Service Alternate Output 5-43
FSLC 6-41, 6-44
FSLCX, Fire Service Light C.O.P. Auxiliary Output 5-44
FSLL 6-41, 6-44
FSLLX, Fire Service Lobby Light Auxiliary Output 5-44
FSM, Fire Service Main Output 5-44
FSO, Fire Service On Output 5-44
FSVC, True Fire Service Output 5-44
FULLY MANUAL DOORS option 5-23
FWI 6-41, 6-44
FWI, Fire warning indicator output flag 5-9
FWIX, Fire Service Buzzer Auxiliary Output 5-44
FWL, Fire Warning Light Output 5-44
G
Gateway screen 5-98
GED, Gong enable down output flag 5-9
GEDR, Gong enable down output (rear) flag 5-9
GEDRX, Gong Enable Down Rear Auxiliary Output 5-44
GEDX, Gong Enable Down Auxiliary Output 5-44
GEU, Gong enable up output flag 5-9
GEUR, Gong enable up output (rear) flag 5-9
GEURX, Gong Enable Up Rear Auxiliary Output 5-44
GEUX, Gong Enable Up Auxiliary Output 5-44
GHT, Gong hold timer flag 5-9
GHTR, Gong hold timer flag (rear) 5-9
Gongs/Lanterns Menu options 5-28
GOVERNOR OVERSPEED 6-7
GRAY CODE 5-48
Gray Code outputs 5-44
Gray Code PI 5-44
To Next Page
Loading...
Need help?
General
