Index-6 Manual # 42-02-1P21
ground
ground test 3-2
wiring 2-8, 2-9
Grounding 2-8
GROUP TO CAR COMMUNICATION LOSS message 6-20
GS 6-41, 6-42
GS INPUT FAILURE message 6-20
GS, Gate Switch Input 5-33
GSR 6-42
GSR INPUT FAILURE message 6-20
GSR, Gate Switch Rear Input 5-34
GTDE, Gong timer down enable flag 5-9
GTUE, Gong timer up enable flag 5-9
H
H, High Speed output 5-44
H, High speed output flag 5-9
Hall and Car Call Buses Disconnected message 6-20
Hall Call Bus is disconnected message 6-20
HALL CALL DOOR TIMER 5-26
HBF, Hall Call Bus Failure input 5-34
HC- DVR Driver Board 1-6
HCC, Hall Call Cancel input 5-34
HC-CHP CAN Hub and Power Supply Board Quick Reference
6-38
HC-CHP, CAN Hub/Power Supply Board 1-5
HC-CTL Control board 6-40
HC-CTL Main Control Board 1-7, 1-8
HC-DVR Driver Board Quick Reference 6-47
HCDX, Hall call disconnect flag 5-9
HC-MPU Main Processor Board Quick Reference 6-50
HC-MPU Main Processor Unit 5-2
HCP, Hall Call Button Pushed Output 5-44
HCR, Hall call reject flag 5-9
HCR, Hall Call Reject Output 5-44
HCR1 - HCRx, Hall Card Reader Front Landing Inputs 5-34
HCR1R - HCRxR, Hall Card Reader Rear Landing Inputs 5-34
HCRO, Hall Card Reader Override input 5-34
HCRO1 - HCRxx, Hall Card Reader Front Landing Outputs
5-44
HCRO1R - HCRxxR, Hall Card Reader Rear Landing Outputs
5-44
HCT, Hall call door time flag 5-9
HCTR, Hall call door time flag (rear) 5-9
HC-UIO Universal Input/Output Board 1-6
HD, High speed delay flag 5-9
HDCB, Front Hall Door Close Button Input 5-34
HDCBR, Rear Hall Door Close Button Input 5-34
HDNL, High speed down an not leveling output 5-44
HDOB, Front Hall Door Open Button Input 5-34
HDOBR, Rear Hall Door Open Button Input 5-34
HDSC, Heat Detector Shutdown Complete Output 5-44
HDSTI, Front Hall Door Stop Input 5-34
HDSTIR, Rear Hall Door Stop Input 5-34
HEATD, Heat Detector Input 5-34
Heavy Load Weigher Condition message 6-20
HEO, Hospital Emergency Operation output 5-44
HIGH SPEED DELAY AFTER RUN? option 5-52
HIGH SPEED INSPECTION option 5-66
HLD 6-41, 6-44
HLI, Heavy Load Input 5-34
HLI, Heavy load input flag 5-10
HLW, Heavy load weigher flag 5-10
HLW, Heavy Load Weigher Output 5-44
HML, Home Landing Input 5-34
HML, Home landing input flag 5-10
Hoistway access 5-104
Hoistway Access Inspection 1-14
HOISTWAY ACCESS? option 5-54
HOISTWAY DOOR BYPASS SW. FAILURE message 6-20
Hoistway Learn 5-100
Hoistway Safety Device Open message 6-20
HONEYWELL FIRE OPERATION option 5-20
HOSP, In car hospital emergency input flag 5-10
HOSP, In-Car Hospital Service Switch Input 5-35
HOSPH2, Hospital emergency phase 2 flag 5-10
HOSPH2, Hospital Emergency Phase 2 output 5-45
HOSPITAL EMERG. OPERATION? option 5-50
HOSPITAL EMERG. TIMER 5-27
Hospital Emergency Operation 6-56
Hospital Operation I/O 6-56
Hospital Phase 1 Operation message 6-20
Hospital Phase 2 Operation message 6-21
Hospital Service message 6-20
Hospital Service Operation 1-17
HSEL, Hospital Emergency Select output 5-45
HSEL, Hospital service select flag 5-10
HUNL, High speed up and not leveling 5-45
HWI, Hospital Emergency Select output 5-45
HYD1-TR0, Hydro/Traction flag 5-10
I
ICEN 6-44
ICPD 5-35
ICPD INPUT FAILURE message 6-21
ICPU 5-35
ICPU INPUT FAILURE message 6-21
ICTD 6-44
ICTD INPUT FAILURE message 6-21
ICTU 6-44
ICTU INPUT FAILURE message 6-21
IDC connector 6-3
iMonitor 1-20
In Car Inspection 1-13
In Car Inspection Down Direction 5-35
In Car Inspection Up Direction 5-35
In Car Stop Switch Activated message 6-21
IN, Inspection or access input flag 5-10
INA 6-44
INA INPUT FAILURE message 6-21
INA, INAX Relay Monitoring input 5-35
IN-CAR INSPECTION message 6-21
INCF, Independent service car call cancel flag 5-10
INCP 6-44
INCP INPUT FAILURE message 6-21
INCT 6-44
INCT INPUT FAILURE message 6-21
IND 6-41, 6-44
IND, Independent service input flag 5-10
IND. BYPASS SECURITY? option 5-53