Scan-to-Send Function 1-2
1.1 Operations Available with Scan-to-Send Function
1
1 Scan-to-Send Function
1.1 Operations Available with Scan-to-Send Function
The scanned original data can be sent to a computer or server, and saved on the hard disk (User Box) of this
machine.
It may be necessary to make the following settings prior to using the Scan-to-Send Function. For details, refer
to the explanations of each function.
The Scan-to-Send Function provides the following sub-functions.
d Reference
Original data scanned by this machine can be saved in the USB memory connected to this machine. For de-
tails, refer to "User's Guide [Box Operations]/[Use a USB Memory Device (External Memory)]".
Functions Description
Scan to E-mail Sends a converted file to any E-mail address as an E-mail attachment.
SMB Send Sends a converted file to a shared folder of a computer. To use this func-
tion, specify your computer or file server as a destination.
FTP Send Sends a converted file to the FTP server. This function is useful when trans-
ferring a file through the FTP server.
WebDAV Send Sends a converted file to the WebDAV server. This function is useful when
transferring a file through the WebDAV server.
Save in User Box Saves the original data scanned by this machine in a User Box of this ma-
chine.
The original data saved in a User Box can be sent to a shared folder or sent
as an E-mail attachment.
WS scan Imports original data by issuing a scan instruction from a computer without
configuring complicated system settings, or sends original data scanned
by this machine to a computer.
This function is supported by Windows of Vista or later.
TWAIN scan Converts original data scanned by this machine into a file, and imports it
from a computer on the network using applications compatible with a
TWAIN device.
Scan server sending Sends a converted file to a scan server. When receiving a file, a scan server
sends it as an E-mail attachment based on a workflow, or saves it in a
shared folder of a computer.
To Next Page
Loading...
