Description of Setup Buttons (User Settings) 12-15
12
[JPEG Compression Level]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [JPEG Compression Level]
Select the default compression method for color fax from [High Quality], [Standard] and [High Compression].
Data size is the largest in [High Quality] and the lowest in [High Compression].
[Standard] is specified by default.
[Black Compression Level]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Black Compression Level]
Select the default compression method for black-and-white fax from [MH] and [MMR].
Data size of [MH] is larger than [MMR]. If you cannot open the file saved in [MMR], save data in [MH].
[MMR] is specified by default.
[TWAIN Lock Time]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [TWAIN Lock Time]
If you scan data from a computer using TWAIN-compatible application software, the Control Panel of this
machine is locked.
If necessary, change the time until the operation panel is unlocked automatically.
[120 sec.] is specified by default.
[Default Scan/Fax Settings]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Default Scan/Fax Settings]
Change the default settings (settings when the power is turned on, and the Reset is pressed) in fax/scan
mode.
You can change the setting by selecting [Current Setting] after the option settings in fax/scan mode are
changed.
[Factory Default] is specified by default.
[Default Enlarge Display Settings] ([Scan/Fax Settings])
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Default Enlarge Display Settings]
Change the default settings (settings when the power is turned on, and the Reset is pressed) in fax/scan
mode, when using in enlarge display mode.
You can change the setting by selecting [Current Setting] after the option settings in fax/scan mode are
changed.
[Factory Default] is specified by default.
[Compact PDF/XPS Compression Level]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Compact PDF/XPS Compression Level]
Select the default compression method for saving data in the compact PDF or compact XPS format from
[High Quality], [Standard] and [High Compression].
Data size is the largest in [High Quality] and the lowest in [High Compression].
[Standard] is specified by default.
[Distributed Scan XPS Set-
tings]
Select [XPS] or [Compact XPS] as the file type to send data to a scan serv-
er. This is applied when XPS is set to PSP (Post-Scan-Process) as the file
type.
For details, refer to page 12-16.
Settings Description
To Next Page
Loading...
