Description of Setup Buttons (Administrator Settings) 13-5
13
[Registering and Changing Addresses]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings] - [Registering and Changing Addresses]
Select whether to allow the user to register or change destinations.
[Allow] is specified by default.
[Change the "From" Address]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings] - [Change the "From" Address]
Select whether to allow the user to change sender E-mail address ("From" address).
[Restrict Operation]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Operation]
Specify items for which access is restricted.
[Reset Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings]
Select whether to reset the functions and settings that are currently displayed when this machine has not
been operated for a certain period of time.
Settings Description
[Allow] Allow the user to change the "From" address.
[Allow] is specified by default (without user authentication).
[Administrator E-Mail Ad-
dress]
Prohibit the "From" address from being changed and use the administra-
tor's E-mail address.
[Login User Address] Prohibit the "From" address from being changed and use the user's E-mail
address. Administrator's E-mail address is used if user's E-mail address
has not been registered.
[Login User Address] is specified by default (with user authentication).
Settings Description
[Restrict Broadcasting] Select whether to prohibit the user from sending faxes to multiple destina-
tions. To prohibit broadcast, select [ON].
[OFF] is specified by default.
Settings Description
[System Auto Reset] Select whether to reset all settings (except registered settings) when this
machine has not been operated for a certain period of time.
For details, refer to "User's Guide [Copy Operations]/[Description of Setup
Buttons (Administrator Settings)]".
[Auto Reset] Select whether to reset all settings (except registered settings) for each of
Copy, Fax/Scan, User Box functions when this machine has not been op-
erated for a certain period of time.
For details, refer to "User's Guide [Copy Operations]/[Description of Setup
Buttons (Administrator Settings)]".
[Job Reset] Select whether to reset settings for the conditions that are applied when
changing users or loading a document into the ADF.
For details, refer to page 13-6.
To Next Page
Loading...
Need help?
General
