Muratec MFX-C2280 - Adding Information to the Header;Footer ([Header;Footer]); Other Option Settings (Application Settings); Scanning after Erasing Text and Shadows in the Margins of an Original ([Frame Erase]); Sharpening the Border between Text Etc. ([Sharpness])

Scan-to-Send Function 1-25
1.4 Scan Option Settings
1
Adding information to the header/footer ([Header/Footer])
Add the date, time, and any arbitrary text in the top and bottom margins (header/footer) of the specified page.
You must register the information to be added to the header and footer on this machine in advance.
For details, refer to page 11-33.
Related setting (for the administrator)
- For details on how to register the information to be added for header and footer, refer to page 13-7.
1.4.5 Other Option Settings (Application Settings)
Scanning after erasing text and shadows in the margins of an original
([Frame Erase])
Erases an area of an identical specified width along the four sides of an original. You can specify the width
to be erased for each side.
This is convenient when you want to erase the reception record of the header and footer of a fax, or shadows
of punch holes on the original.
For details, refer to page 11-34.
Sharpening the border between text etc. ([Sharpness])
Sharpen the edges of the image such as text in the table and graphic, to improve legibility.
Smoothen the rough contours of an image or sharpen blurred images.
For details, refer to page 11-34.