Scan-to-Send Function 1-8
1.2 How to Send
1
1.2.3 Sending a Fax by Recalling a Program
Fax/Scan program
Program is a function used to register a combination of frequently used option settings as a recall key. The
program to be registered in Fax/Scan mode is called Fax/Scan program.
When you register a Fax/Scan program, you can recall the combination of option settings from the main
screen with a single key action. You can also include a destination in program registration.
Registering a Fax/Scan program
You can register up to 400 Fax/Scan programs.
If 400 Fax/Scan programs are already registered, delete unnecessary Fax/Scan programs before registering
a new program.
1 Tap [Scan/Fax].
2 Configure the Scan option settings.
% The settings configured here are registered as a program.
To Next Page
Loading...
