Sending with Web Service (WS Scan) 7-4
7.2 Preparation for WS scan
7
Configuring the environment to use the WS scan transmission function
Enable scanning using the Web service. Also, configure settings to detect this machine using the Web serv-
ice, define information of this machine used as a scanner, and specify how to connect to this machine.
How to configure the setting is explained using Web Connection. For details, refer to "User's Guide [Web
Management Tool]/[Configuring the Scan Environment]".
7.2.3 Computer Side: Steps Required to Use This Function
Install a scanner driver required for WS scan transmission in a computer. Then, configure operations to be
performed after scan transmission, in the scanner driver. This example shows a procedure for Windows 7.
Before installation, from the Start menu, select [Control Panel] - [Network and Internet] - [Network and Shar-
ing Center] - [Advanced sharing settings], and check that [Network discovery] is enabled.
1 From the Start menu, click [Computer] - [Network].
This displays the devices connected to the network.
2 Right-click the scanner icon of this machine, and select [Install].
% Depending on the settings on the computer, the UAC (User Account Control) dialog box may ap-
pear. Check the details, and continue.
% If both of the scan and printer functions of the Web service are enabled on this machine, the ma-
chine is represented by the printer icon.
The driver is installed automatically. When the confirmation dialog box appears, click [Close].
To Next Page
Loading...
Need help?
General
