Sending Original Data as an E-mail Attachment (Scan to E-mail) 2-6
2.3 How to Send
2
2.3 How to Send
1
Load the original.
2 Tap [Scan/Fax].
3 Specify the destination E-mail address.
% For details on how to specify a destination, refer to page 1-12.
% Specifying multiple destinations carries out computer sending and fax transmission simultaneously.
% If a message appears to indicate that the From address is not registered after a destination has been
specified, select [E-Mail Settings] in Options, and enter the sender's E-mail address into [From].
% If necessary, you can change the display of the main screen in fax/scan mode (default: [Address
Book]). For details, refer to page 12-12.
To Next Page
Loading...
Need help?
General
