Importing Images by TWAIN Scan 8-3
8.2 Preparation for TWAIN Scanning
8
8.2 Preparation for TWAIN Scanning
8.2.1 Machine Side: Steps Required to Use This Function (for the Administrator)
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that
an IP address is displayed.
d Reference
If no IP address is displayed, you need to set up the network. For details, refer to "User's Guide [Web Man-
agement Tool]/[Operations Required to Use Web Connection]".
Checking the environment to use the TWAIN scan function
Check that the appropriate settings are configured to use this machine as a scanner. (You can use this func-
tion with the default settings unless otherwise requested.)
How to configure the setting is explained using Web Connection. For details, refer to "User's Guide [Web
Management Tool]/[Configuring the Scan Environment]".
To Next Page
Loading...
