Muratec MFX-C2280 - Preparation to Send Data Via a Scan Server (for the Administrator); Preparation Flow; Operations Required to Use this Function; Checking a LAN Cable for Connection

Distributing Data via a Scan Server 9-3
9.2 Preparation to Send Data via a Scan Server (for the Administrator)
9
9.2 Preparation to Send Data via a Scan Server (for the Administrator)
9.2.1 Preparation Flow
1 Connecting this machine to the network
% Checking a LAN cable for connection
% Checking the network settings
Check that an IP address is assigned to this machine.
2 Prepare the environment required to send data via a scan server
% Enabling the Distributed Scan function
3 Preparation finished
9.2.2 Operations Required to Use This Function
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that
an IP address is displayed.
d Reference
If no IP address is displayed, you need to set up the network. For details, refer to "User's Guide [Web Man-
agement Tool]/[Operations Required to Use Web Connection]".
Configuring the environment to send data via a scan server.
Enable the Distributed Scan function.
How to configure the setting is explained using Web Connection. For details, refer to "User's Guide [Web
Management Tool]/[Associating with External Application]".