Description of Setup Buttons (User Settings) 12-11
12
[Auto Color Level Adjust.]
To display: [Utility] - [User Settings] - [System Settings] - [Auto Color Level Adjust.]
When setting the color mode to [Auto Color] to scan an original, adjust the standard to judge whether the
original is in color or black and white.
Tap [Black] or [Full Color] to adjust to the appropriate one of the five levels.
[3] is specified by default.
[Blank Sheet Detection Level]
To display: [Utility] - [User Settings] - [System Settings] - [Blank Sheet Detection Level]
Adjust the detection level of blank page when [Blank Page Removal] is specified for [Original Settings].
Tap [Do not detect] or [Detect] to adjust to the appropriate one of the five levels.
[0] is specified by default.
[Separate Scan from Platen]
To display: [Utility] - [User Settings] - [System Settings] - [Separate Scan from Platen]
Select whether to scan originals continuously at all times even though [Separate Scan] is not specified when
scanning originals using the Original Glass.
[NO] is specified by default.
[Auto Paper Select for
Small Original]
Specify whether to copy an original when an original that is so small that
the machine cannot detect the size automatically is placed on the original
glass.
For details, refer to "User's Guide [Copy Operations]/[Description of Setup
Buttons (User Settings)]".
[Blank Page Print Settings] You can specify this option when you have permission from the adminis-
trator to change the setting.
For details, refer to "User's Guide [Copy Operations]/[Description of Setup
Buttons (User Settings)]".
[Page Number Print Posi-
tion]
You can specify this option when you have permission from the adminis-
trator to change the setting.
For details, refer to "User's Guide [Copy Operations]/[Description of Setup
Buttons (User Settings)]".
[Blank Sheet Detection
Level]
Adjust the detection level of blank page when [Blank Page Removal] is
specified for [Original Settings] in copy or fax/scan mode.
For details, refer to page 12-11.
[Separate Scan from Plat-
en]
Select whether to scan originals continuously at all times even though
[Separate Scan] is not specified when scanning originals using the Original
Glass.
For details, refer to page 12-11.
Settings Description
To Next Page
Loading...
Need help?
General
