Description of Setup Buttons (Administrator Settings) 13-7
13
[Header/Footer Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Stamp Settings] - [Header/Footer Settings]
- [New]
You can register header/footer programs, and change or delete registered programs.
Tips
- To check or edit a header/footer program you registered, select it, then tap [Check/Edit].
- To delete a header/footer program you registered, select it, then tap [Delete].
[Preview Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Preview Settings]
Specify the preview function settings, such as the display mode of preview images that appear when Preview
is pressed on the Control Panel.
[Original Direction Confirmation Screen]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Preview Settings] - [Original Direction Con-
firmation Screen]
Specify whether to display the screen for selecting the original loading direction after pressing Preview when
scanning an original in fax/scan mode.
[ON] is specified by default.
Settings Description
[Name] Enter the name of header/footer program using up to 16 characters.
When selecting a header or footer, give it a name that helps you easily
identify it.
[Header Settings] Select whether to print a header. To print it, specify what to print.
• [Text]: Characters you entered are printed.
• [Date/Time]: Select whether to print date and time. To print it, select the
appropriate display format.
• [Other]: Select whether to print information, such as job number, ma-
chine's serial number, and distribution control number.
[Do Not Print] is specified by default.
[Footer Settings] Select whether to print a footer. To print it, specify what to print.
• [Text]: Characters you entered are printed.
• [Date/Time]: Select whether to print date and time. To print it, select the
appropriate display format.
• [Other]: Select whether to print information, such as job number, ma-
chine's serial number, and distribution control number.
[Do Not Print] is specified by default.
[Pages] Select to print the header/footer on all pages or only on the first page.
[All Pages] is selected by default.
[Text Details] Select the size, font, and color of the text to be printed.
Settings Description
[Original Direction Confir-
mation Screen]
Specify whether to display the screen for selecting the original loading di-
rection after pressing Preview when scanning an original in fax/scan
mode.
For details, refer to page 13-7.
[Realtime Preview] Select whether or not to display a preview image for each page when scan-
ning an original in Scan/Fax mode.
For details, refer to page 13-8.
[Preview Display Condi-
tions (Standard Applica-
tion)]
Select the conditions for displaying preview images.
For details, refer to page 13-8.
[Preview Display Condi-
tions (Registered Applica-
tion)]
Select conditions to display preview images when using an OpenAPI ap-
plication.
For details, refer to page 13-8.
To Next Page
Loading...
Need help?
General
