Description of Setup Buttons 11-7
11
[WebDAV]
To display: [Scan/Fax] - [Direct Input] - [WebDAV]
Enter a destination WebDAV server host name or IP address when scanned original data is sent to a WebDAV
server.
When specifying multiple destinations, tap [Next Dest.] to add destinations.
Settings Description
[Host Name] Enter the host name or IP address of the WebDAV server with up to 253
bytes.
• Host name entry example: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path] Enter the name of a destination folder in the WebDAV server specified in
[Host Name] with up to 142 bytes.
• Entry example: "scan"
[User Name] Using up to 64 characters, enter the name of a user, who has privileges to
access the folder specified in [File Path].
• Entry example: "public_user"
[Password] Enter the password of the user specified in [User Name].
[Port Number] If necessary, change the port number.
In normal circumstances, you can use the original port number.
[Proxy] When a proxy server is used in your environment, select this item.
[SSL Setting] When the SSL is used in your environment, select this item.
To Next Page
Loading...
Need help?
General
