Muratec MFX-C2280 User Guide

Managing Destinations 10-9
10.2 Registering Multiple Destinations as a Group (Group)
10
10.2 Registering Multiple Destinations as a Group (Group)
Group
Register multiple destinations as a group. Group is a convenient way to broadcast data.
Up to 100 groups can be registered for Group.
Related setting (for the administrator)
- Select whether to allow the user to register or change destinations (default: [Allow]). For details, refer to
page 13-5.
Registering a group
0 To register a group, you must register the address book to be added to the group in advance.
1 Tap [Utility] - [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Group] - [New].
% The administrator can perform the same actions by selecting [Administrator Settings] - [One-
Touch/User Box Registration].
2 Enter destination information, then tap [OK].
% For details on registration information, refer to page 12-8.
Tips
- To check the settings for a registered group, select its registered name, then tap [Check Job Set.].
- To change the settings for a registered group, select its registered name, then tap [Edit].
- To delete a registered group, select its registered name, then tap [Delete].
d Reference
You can also register groups using Web Connection. For details, refer to "User's Guide [Web Management
Tool]/[Registering Various Types of Information]".

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English