Sending to an FTP Server (FTP Send) 4-3
4.2 Preparation for FTP Send (for the Administrator)
4
4.2 Preparation for FTP Send (for the Administrator)
4.2.1 Preparation Flow
1 Connecting this machine to the network
% Checking a LAN cable for connection
% Checking the network settings
Check that an IP address is assigned to this machine.
2 Prepare the environment required to use the FTP Send function
% Enabling the FTP Send function
You can use this function with the default settings unless otherwise requested.
3 Configuring the machine to your environment
% Registering a frequently used destination
This will save you the trouble of entering a destination each time you send data.
% Using a proxy server
When transferring data via a proxy server in your network environment, configure its setting.
4 Preparation finished
4.2.2 Operations Required to Use This Function
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.
Checking the network settings
Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an
IP address is displayed.
d Reference
If no IP address is displayed, you need to configure the network. For details, refer to "User's Guide [Web Man-
agement Tool]/[Operations Required to Use Web Connection]".
Checking the environment to use the FTP Send function
Enable the FTP Send function. (You can use this function with the default settings unless otherwise request-
ed.)
How to configure the setting is explained using Web Connection. For details, refer to "User's Guide [Web
Management Tool]/[Configuring the Scan Environment]".
To Next Page
Loading...
Need help?
General
