Description of Setup Buttons (User Settings) 12-5
12
[PC (SMB)]
To display: [Utility] - [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Address Book
(Public)] - [PC (SMB)] - [New]
Register destination computer names (host name) or IP addresses.
Tips
- To check the settings for a registered destination, select its registered name, then tap [Check Job Set.].
- To change the settings for a registered destination, select its registered name, then tap [Edit].
- To delete a registered destination, select its registered name, then tap [Delete].
Settings Description
[No.] Destination registration number. [No.] is automatically registered using an
unused smaller number. If you want to specify a number, tap [No.] and en-
ter the number within the range of 1 to 2000.
[Name] Enter the destination name to be displayed on the Touch Panel (using up
to 24 characters).
Assign a name that helps you easily identify the destination.
[Sort Character] Enter the same name as the registered name (using up to 24 characters).
You can sort destinations by registration name.
[Index] Select a corresponding character so that the destination can be index-
searched by registration name.
• If an alphabet character is specified for the initial of a registration name,
search text is automatically specified with the alphabet character. If an-
ything other than alphabet character is specified for the initial of a reg-
istration name, [etc] is specified by default.
• For a frequently used destination, also select [Favorites]. If [Favorites]
is selected, the destination will appear in the main screen in fax/scan
mode, enabling the user to easily select a destination.
[User ID] Using up to 64 characters, enter the name of a user, who has privileges to
access the folder specified in [File Path].
• For workgroup user, type in only the user name. Entry example:
"User01"
• For domain user, type in user-name@domain-name. Entry example:
"User01@abc.local"
[Password] Enter the password of the user specified in [User ID].
[Host Address] Enter a computer name (host name) or IP address as a destination with up
to 253 bytes.
• Example of computer name (host name) entry: "HOME-PC" (uppercase
letters only)
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path] Enter the shared folder name of the computer specified in [Host Address]
with up to 255 bytes. The shared folder name is generally referred to as a
shared name.
• Entry example: "scan"
When specifying a folder in the shared folder, insert a symbol, "\", between
the folder names.
• Entry example: "share\document"
[Reference] On the Touch Panel, search for a computer to send a file to, and select a
target shared folder.
When the authentication screen appears, enter the name and password of
a user who has privileges to access the selected folder. After authentica-
tion, [Host Address] or [File Path] is entered automatically.
The Reference function may fail under the following conditions.
• If 512 or more workgroups or computers are on the network (subnet)
connected to this machine, this function may fail.
• This function is not available in the IPv6 environment.
To Next Page
Loading...
Need help?
General
