Description of Setup Buttons 11-6
11
[FTP]
To display: [Scan/Fax] - [Direct Input] - [FTP]
Enter a destination FTP server host name or IP address when scanned original data is sent to a FTP server.
When specifying multiple destinations, tap [Next Dest.] to add destinations.
Settings Description
[Host Name] Enter the host name or IP address of the destination FTP server with up to
63 bytes.
• Host name entry example: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path] Enter the name of a destination folder in the FTP server specified in [Host
Name] with up to 127 bytes.
• Entry example: "scan"
When not specifying a file path, enter "/".
[User Name] If authentication is required in the destination FTP server, enter the login-
enabled user name (using up to 64 characters).
• Entry example: "public_user"
[Anonymous] When authentication is not required for the destination FTP server, select
this item.
[Password] Enter the password of the user specified in [User Name].
[Port Number] If necessary, change the port number.
In normal circumstances, you can use the original port number.
[Proxy] When a proxy server is used in your environment, select this item.
[PASV] When a PASV server is used in your environment, select this item.
To Next Page
Loading...
