Muratec MFX-C2280 - Preparation for SMB Send; Preparation Flow

Sending a File to a Shared Folder of a Computer (SMB Send) 3-3
3.2 Preparation for SMB Send
3
3.2 Preparation for SMB Send
3.2.1 Preparation Flow
1 Prepare a destination computer (Windows 7, Windows Vista, Windows XP, or Mac OS X
10.7/10.6/10.5).
% Checking the computer and user names
Check the destination computer name and available user name.
% Creating a shared folder
Create a destination folder, and start sharing.
2 Connecting this machine to the network
% Checking a LAN cable for connection
% Checking the network settings
Check that an IP address is assigned to this machine.
3 Prepare the environment required to use the SMB Send function
% Enabling the SMB Send function
You can use this function with the default settings unless otherwise requested.
4 Configuring the machine to your environment
% Registering a frequently used destination
This will save you the trouble of entering a destination each time you send data.
% Using the WINS server
If WINS (Windows Internet Name Service) is used for a communication with a device on the network,
register the WINS server.
% Using the direct hosting SMB service
When using the direct hosting SMB service for a communication with a device on the network, enable
the direct hosting SMB service. (You can use this function with the default settings unless otherwise
requested.)
% Using LLMNR
When using LLMNR (Link-local Multicast Name Resolution) for a communication with a device on the
network, enable LLMNR. (You can use this function with the default settings unless otherwise request-
ed.)
% Using DFS
If DFS (Distributed File System) is installed in your environment, configure its setting.
5 Preparation finished