Scan-to-Send Function 1-11
1.2 How to Send
1
3 Tap the [Program] key.
4 Select the program you want to recall, and tap [Recall].
The registered content of a program is applied.
% If necessary, you can change the page to be displayed in the main screen of the program (default:
[PAGE1]). For details, refer to page 12-13.
5 Specify the destination if no destination is registered for a program.
6 Press the Start key.
% Tap [Check Setting] before sending, and check the destination and settings as necessary.
% To redo operations for specifying destinations or option settings, press Reset.
Transmission begins.
% If you press the Stop key while scanning an original, the scanning process stops, and a list of
stopped jobs appears. To cancel scanning of the original, delete inactive jobs from the list.