Muratec MFX-C2280 User Guide

Scan-to-Send Function 1-22
1.4 Scan Option Settings
1
2 Tap [Application] - [No. of Originals] - [Separete Scan], and set to [ON].
3 Press the Start key.
The original is scanned.
4 Load the next original, then press the Start key.
% Tap [Change Setting] to change the option settings according to the new original as necessary.
5 Repeat Step 4 until all originals are scanned.
6 After all originals are scanned, tap [Finish] and press the Start key.
Transmission begins.
Related setting
- Select whether to always scan originals continuously without specifying [Separate Scan] when scan-
ning originals using the Original Glass (Default value: [No]). For details, refer to page 12-11.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English