Sending to an FTP Server (FTP Send) 4-8
4.4 Application Functions
4
4 Press [Application] - [App] - [URL Dest. Settings], and select an E-mail address where to notify a des-
tination.
% The Scan function can notify only one E-mail address. If the mailing list is used, it is convenient to
register its E-mail address as a destination.
5 Press the Start key.
% Tap [Check Setting] before sending, and check the destination and settings as necessary.
% To redo operations for specifying destinations or option settings, press Reset.
Transmission begins.
% If you press the Stop key while scanning an original, the scanning process stops, and a list of
stopped jobs appears. To cancel scanning of the original, delete inactive jobs from the list.
To Next Page
Loading...
Need help?
General
