NAVI F-52 - Conductivity Measurement

Chapter 6 CONDUCTIVITY MEASUREMENT(F-54,55)
6.3 Conductivity Measurement
F-52, 53, 54, 55 93
6.3 Conductivity Measurement
By the step described in the previous section,
pressing the MEAS key should show the
instantaneous measurement value.
1. In the COND Measurement
screen, press the MEAS key.
The AutoHold measurement starts.
When the indication stabilizes, the
HOLD indication starts blinking, and
the measurement result is displayed.
Blinking
Lit