NAVI F-52 - When the Manual Data Memory Is Performed in the Measurement Mode; Printout from DATA out Screen

Chapter 14 PRINTER
14.4 Sample Printout
180 HORIBA
14.4.2 When the manual data memory is performed in the Measure-
ment mode
The printer prints the data memory No. in the first line and the data in accordance with the
format same with the one in
"14.4.1 When the ENTER key is pressed in the Measurement
mode" page 177.
● Example in the pH Measurement mode
14.4.3 Printout from DATA OUT screen
The same format with the one described in "14.4.2 When the manual data memory is per-
formed in the Measurement mode" page 180.
Data memory No. is added
EXACT printout
BRIEF printout
No sensitivity indication
for 1-point calibration