NAVI F-52 - Page 192

Chapter 14 PRINTER
14.4 Sample Printout
F-52, 53, 54, 55 179
● Salt Measurement mode
● Resistivity Measurement mode
Operator name: max.12 letters
Temperature compensation setting
At Manual mode: MTC
At Auto mode: ATC
MFG: max. 7 letters
ID#: max. 12 letters
Lot: max. 7 letters
EXACT printout
When the data in the one con-
firmed with AutoHold, “Stable” is
shown.
Nothing is displayed for the
instantaneous value measure-
ment.
DIsplayed only with CAL data
BRIEF printout
Operator name: max. 12 letters
Temperature compensation
setting
At Manual mode: MTC
At Auto mode: ATC
MFG: max. 7 letters
ID#: max. 12 letters
EXACT output
When the data in the one con-
firmed with AutoHold, “Stable”
is shown.
Nothing is displayed for the
instantaneous value measure-
ment.
BRIEF output
Unit:
ohm•m, kohm•m, Mohm•m
ohm•cm, kohm•cm,Mohm•m