EasyManua.ls Logo

NAVI F-52 - Password Letter Number; Password Limit

Default Icon
270 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 10 SECURITY SETUP
10.3 Setting/Performing each option
F-52, 53, 54, 55 123
10.3.3 Password letter number
Minimum number of letters used for the password can be set.
This setting is valid only when the password is newly registered.
1. With the PASSWORD LENGTH option selected, press the ENTER key.
The input is available.
2. Press or key, and input the number of letters.
Setting range: 1 to 10
3. Press the ENTER key.
The setting is made.
10.3.4 Password Limit
By setting the Password Limit ON, input of erroneous passwords more than the set times until
the normal startup locks out the system.
To make the setting valid:
1. With the PASSWORD RESTRICTION option selected, press or key, and
select ON.
2. With ON selected, press the ENTER key twice.
The setting can be made.
3. Press or key, and input the number of allowable times for an erroneous
password to be input.
Setting range: 1 to 99
4. Press the ENTER key.
The setting is determined.
To make the setting invalid:
1. With the PASSWORD RESTRICTION option selected, press or key, and
select OFF.
2. Press the ENTER key.
The setting is made.

Table of Contents