Chapter 11 METER SETTING
11.4 Maintenance Setting
F-52, 53, 54, 55 139
11.4 Maintenance Setting
● Common operation
1. In the SETUP screen, press ↑ or
↓ key and select MAINTENANCE
option.
2. Press the ENTER key.
The MAINTENANCE screen
appears.
3. Press ↑ or ↓ key and select the
option to be set or executed.
4. Set or perform the option accord-
ing to each configuration.
5. Repeat step 3. and step 4. above,
and complete setting and/or exe-
cution of the necessary options.
6. When all the setting/execution is
completed, press F4 (RETURN).
The setting is made.
Pressing the ESC key returns to the SETUP
screen.
To Next Page
Loading...