Chapter 14 PRINTER
14.2 Cautionary items
176 HORIBA
14.2 Cautionary items
●
Connect your printer only after turning OFF the power to the main unit of the pH
meter.
Connecting the printer with powered may break the meter and devices.
●
Connect the meter with the printer only with the exclusive cable.
●
Assure the environment free from the noise source in the surroundings. Other-
wise, the commands are not correctly recognized to cause a malfunction.
●
Operation with the paper empty may miss the data when the paper is provided
again. Execute the printout again when this happens.
●
The model and the manufacturer may be changed according to improvement
and/or change of the printer specification or features.
●
Font, size of the printout data may be changed without notice.
14.3 Connection
● Connection
Confirm the following items before the connection.
●
The meter power is turned OFF
●
The printer power is turned OFF
●
Be sure to use a cable that matches the printer.
Assure the connection by the following step:
1. Connect the meter and the printer by the exclusive cable.
2. Turn ON the printer power.
3. Turn ON the meter.
Be sure to avoid paper from being run-out.
● Check the connection
Check the external output connection indication is assured with the printer connection, which
are displayed on the pH Measurement screen.
To Next Page
Loading...