Chapter 8 RESISTIVITY MEASUREMENT(F-54, 55)
8.2 Setting Configuration
F-52, 53, 54, 55 111
6. Press the ENTER key again.
The display color of the set part changes, and the values can be input by pressing ↑ or
↓ key.
Setting range: 0.0 Ω•m to 199.9 MΩ•m
Switch the auxiliary unit by pressing ← or → key.
7. Press the ENTER key.
The setting is determined, and the display color of the set part changes.
8. Press F4 (RETURN).
The setting is reflected, and the display returns to the Measurement screen.
● Check mode
The resistivity does not support the check mode function.
To Next Page
Loading...