Chapter 5 Ion Measurement (F-53,55)
5.3 Measurement Using Standard Addition Method
80 HORIBA
6. Press the MEAS key.
The AutoHold measurement starts.
When the indication stabilizes, the
HOLD indication starts blinking.
When the measurement is completed,
the concentration of the sample solu
-
tion will display in the screen.
To continue the measurement:
Press the MEAS key.
To change the conditions:
Press F1 (CONDITION).
To switch SINGLE/DOUBLE:
Press F1 (CONDITION) and press the ESC
key.
Blinking
Lit
To Next Page
Loading...