Item
No.
Item Input Data Description Default Related
Program
04 Transfer Destina-
tion Number
If Transfer mode is
(Refer to 13-04-03) :
1 = Internal Dial Mode
1 ~ 9, 0,
, #, P, R, @
(Maximum 36 Charac-
ters)
2 = Incoming Ring
Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits
when using ISDN func-
tionality
3 = Remote Monitor
Dial (Up to 4 digits)
(SL1000)
Dial (Up to 8 digits)
(SL1100)
This setting can be changed only
when Program 13-04-03 is set
other than 0. Also if the Program
13-04-03 is set to 3 only Exten-
sion number can be changed.
(V1.5 Added)
No Setting 13-04-03
05 Incoming Ring
Pattern
0 = Normal System
Ring Pattern
1 ~ 4 = Tone Pattern 1
~ 4
5 ~ 9 = Scale Pattern 1
~ 5
10 ~ 13 = Tone Pattern
5 ~ 8 (V3.0 Added)
(SL1100)
When set 1 or 2 at PRG13-04-03,
this program is used to assign a ring
pattern for the caller ID routed call.
0 13-04-03
06 CR/PR feature 0 = Disable
1 = Enable
0 14-05
07 VRS Message
Number
0 ~ 100
If the VRS can not be played it
will use a Program 13-04-05
Ringing Pattern. (V1.5 Added)
0
08 Memo1 (V1.5 De-
leted)
Maximum 28 digit
Can only be changed in WebPro
or PCPro.
No Setting 15-02-58
09 Memo2 (V1.5 De-
leted)
Maximum 28 digit
Can only be changed in WebPro
or PCPro.
No Setting 15-02-58
10 Memo3 (V1.5 De-
leted)
Maximum 28 digit
Can only be changed in WebPro
or PCPro.
No Setting 15-02-58
11 Mailbox Number 0 ~ 544
This setting only works when
Program 13-04-01 Speed Dial
and Incoming Trunk Call match.
(V1.5 Added)
0 40-02
Conditions
None
Feature Cross Reference
• Abbreviated Dialing/Speed Dial
SL1000/SL1100
ISSUE 3.01
2-106 Program 13 : Abbreviated Dialing
Program
13
To Next Page
Loading...
