NEC SL 1000 - Page 154

Item
No.
Item Input Data Description Default Related
Program
03 Extension Ring
Tone
1 = Tone Pattern 1
(DR300)/ High (DR700)
(SL1000)
2 = Incoming external
ring tone/ Medium
(DR700) (SL1000)
3 = Tone Pattern 3
(DR300)/ Low (DR700)
(SL1000)
4 = Tone Pattern 4
(DR300)/ Melody 1
(DR700) (SL1000)
5 = Tone Pattern 5
(DR300)/ Melody 2
(DR700) (SL1000)
6 = Tone Pattern 6
(DR300)/ Melody 3
(DR700) (SL1000)
7 = Tone Pattern 7
(DR300)/ Melody 4
(DR700) (SL1000)
8 = Tone Pattern 2
(DR300)/ Melody 5
(DR700) (SL1000)
1 = High (SL1100)
2 = Medium (SL1100)
3 = Low (SL1100)
4 = Ring Tone 1
(SL1100)
5 = Ring Tone 2
(SL1100)
6 = Ring Tone 3
(SL1100)
7 = Ring Tone 4
(SL1100)
8 = Ring Tone 5
(SL1100)
Use this option to set the tone
(pitch) of the incoming extension call
ring for the extension port you are
programming. Also refer to Program
15-08.
5 (SL1000)
8 (SL1100)
04 Redial (Speed Di-
al) Control
0 = Common Abbrevi-
ated Dial
1 = Group Speed Dial-
ing
2 = Directory Dialing
(SL1000)
Use this option to control the func-
tion of the extension Redial key
when used with Speed Dialing. The
Redial key can access either the
Common/Individual or Group Speed
Dialing numbers.
0
05 Transfer Key Op-
eration Mode
0 = Transfer
1 = Call back
2 = Hook
Use this option to set the operating
mode of the extension Transfer key.
The keys can be for Call Transfer,
Serial Calling or Flash. When select-
ing the Flash option (selection 2),
refer also to Program 81-01-14.
0
06 Hold Key Operat-
ing Mode
0 = Normal (Common)
1 = Exclusive Hold
2 = Park Hold
Use this option to set the function of
the Multiline Hold key. The Hold key
can activate normal Hold or Exclu-
sive Hold.
0
07 Automatic Hold
for CO Lines
0 = Hold
1 = Disconnect (Cut)
When talking on a CO call and an-
other CO line key is pressed, the
original trunk is placed on Hold (0)
or Disconnected (1).
1
08 Automatic
Handsfree
0 = Preselect
1 = One-Touch (Auto-
matic Handsfree)
Use this option to set whether
pressing a key access a One-Touch
Key or if it preselects the key.
1
10 Ringing Line
Preference for
Trunk Calls
0 = Idle (Off)
1 = Ringing (On)
Use this option to select between
Idle and Ringing Line Preference for
trunk calls.
1
SL1000/SL1100 ISSUE 3.01
2-132 Program 15 : Extension, Basic Setup
Program
15