NEC SL 1000 - Page 200

Item
No.
Item Input Data Description Default Related
Program
11 Handsfree Micro-
phone Control
0 = Off
1 = On
Use this option
to control the
setting for Mul-
tiline Terminal
Handsfree mi-
crophone after
being discon-
nected and re-
connected. If
set to 0, the
microphone is
always off
when the ter-
minal is recon-
nected. If set to
1, the micro-
phone remains
in the same
state it was in
when the ter-
minal is recon-
nected.
1
12 Forced Intercom
Ring (ICM Call Type)
0 = Disable (Voice)
1 = Enable (Signal)
Use this option
to enable or
disable Forced
Intercom Ring-
ing. If enabled,
incoming Inter-
com calls nor-
mally ring. If
disabled, Inter-
com calls
voice-an-
nounce.
1
15 Caller ID Display
Mode
0 = Name and Number (Both)
1 = Name
2 = Number
0
18 Dialing Record Dis-
play Time
0 ~ 64800 seconds 30
19 DSS Key - Virtual
Extension Mode
0 = No
1 = Yes
Sets the mode
of a virtual ex-
tension key
that appears
on a DSS con-
sole.
0
24 LCD scroll mode 0 = Character
1 = Dot
0
Conditions
None
Feature Cross Reference
None
SL1000/SL1100
ISSUE 3.01
2-178 Program 20 : System Option Setup
Program
20