NEC SL 1000 - Page 552

Item
No.
Item Input Data Description Default
42 G.726 Jitter Buffer -
Maximum
0 ~ 255 ms Set the maximum G.726 Jitter Buffer. 120
43 iLBC Audio Frame 2 = 20 ms
3 = 30 ms
4 = 40 ms
Maximum number of iLBC Audio Frames.
iLBC assumes the frame of 10ms is a unit.
3
45 iLBC Jitter Buffer -
Minimum
0 ~ 255 ms Set the minimum value of the Jitter Buffer
of iLBC is set. Jitter is the variation in the
time between packets arriving and the buf-
fer allows this variation to be absorbed.
30
46 iLBC Jitter Buffer -
Standard
0 ~ 255 ms Set the average iLBC Jitter Buffer. 60
47 iLBC Jitter Buffer -
Maximum
0 ~ 255 ms Set the maximum iLBC Jitter Buffer. 120
48 ILBC payload number 96 ~ 127 The payload number of iLBC is set. How-
ever, the same number as Item 31 cannot
be set.
98
49 RTP Filter 0 = Disable
1 = Enable
1
50 Fax Relay mode 0 = Disable
1 = Enable
0
51 T.38 Protocol mode 0 = R/U (V1.5 Changed)
1 = U/R (V1.5 Changed)
2 = RTP (V1.5 Changed)
3 = UDPTL (V1.5
Changed)
1
52 Fax Max Rate 1 = V.27ter, 4800 bps
3 = V.29, 9600 bps
5 = V.17, 14400 bps
5
56 Low Speed Data Re-
dundancy
0 ~ 2 0
57 High Speed Data Re-
dundancy
0 ~ 2 0
58 TCF Handling 0 = Local
1= Network
1
61 T.38 RTP Format Pay-
load Number
96 ~ 127 100
62 DTMF Level mode 0 = VoIPDB Unit
1 = Main Soft
0
63 DTMF Level High 1 = - 33 dBm
:
28 = - 6 dBm
28
64 DTMF Level Low 1 = - 33 dBm
:
28 = - 6 dBm
28
Conditions
None
Feature Cross Reference
None
SL1000/SL1100
ISSUE 3.01
2-530 Program 84 : Hardware Setup for VoIPDB
Program
84