NEC SL 1000 - Page 661

Item
No.
Item Input Data Description Default Related
Program
09 Message Waiting
(Rec)
Extension Number (Up
to 4 digits) (SL1000)
(Up to 8 digits)
(SL1100)
Read Only:
Indicates extension number when
left Message Waiting.
None 11-11-09
11-11-10
11-11-11
10 Alarm Clock 1 0 = Disable
1 = Enable
Read Only:
Indicates Alarm Clock 1 setting sta-
tus.
None 11-11-12
11 Preset time at
Alarm 1
Time set in Alarm
Clock 1.
When
PRG93-03-11 is
"0", 「 00 ： 00 」
is indicated.
Read Only:
Indicates the time set in Alarm Clock
1.
None 11-11-12
12 Alarm Clock 2 0 = Disable
1 = Enable
Read Only:
Indicates Alarm Clock 2 setting sta-
tus.
None 11-11-12
13 Preset Time at
Alarm 2
Time set in Alarm
Clock 2.
When
PRG93-03-11 is
"0", 「 00 ： 00 」
is indicated.
Read Only:
Indicates the time set in Alarm Clock
2.
None 11-11-12
14 Forced Intercom
Ring (ICM Call
Type)
0 = Disable(Voice1)
1 = Enable(Signal)
Read Only:
Indicates ICM Call Type per exten-
sion.
None 11-11-15
11-11-16
15 BGM 0 = Disable
1 = Enable
Read Only:
Indicates BGM setting status per ex-
tension.
None 11-11-18
16 Key Touch Tone 0 = Disable
1 = Enable
Read Only:
Indicates Key Touch Tone setting
status per extension.
None 11-11-19
17 Dial Block 0 = Disable
1 = Enable
Read Only:
Indicates Dial Block setting status
per extension.
None 11-11-33
18 Repeat Dial 0 = Disable
1 = Enable
Read Only:
Indicates Repeat Dial setting status
per extension.
None
19 Headset Mode
Switching
0 = Disable
1 = Enable
Read Only:
Indicates Headset Mode Switching
setting status per extension.
None 11-11-65
20 Headset Ringing
Mode Switching
0 = Disable
1 = Enable
Read Only:
Indicates Headset Ringing Mode
Switching setting status per exten-
sion.
None 11-11-43
Conditions
None
Feature Cross Reference
None
ISSUE 3.01
SL1000/SL1100
Programming Manual 2-639
Program
93