Configure System Information
114
S3300 Smart Managed Pro Switch
4. Click the Cancel button to cancel the configuration on the screen, and reset the data
displayed on the screen to the latest value of the switch.
DHCP L2 Relay VLAN Configuration
Use this screen to configure the DHCP L2 Relay VLAN.
Figure 64. DHCP L2 Relay VLAN Configuration
To configure DHCP L2 Relay VLAN:
1. Select System> Servi
ces > DHCP L2 Relay > DHCP L2 Relay Global Configuration.
2. VLA
N ID shows the VLAN ID configured on the switch. Select the ID number of the VLAN
to configure.
Note: For VLAN IDs to appear in the table, they must first be configured
using the Switching > VLAN menu. For more information see
Basic
VLAN Configuration on page 145.
3. Use t
he Admin Mode field to Enable or Disable DHCP L2 Relay on the selected VLAN.
The factory default is Disabled.
4. Use t
he Circuit ID Mode field to Enable or Disable the Circuit ID sub option of DHCP
Option-82. The factory default is Disabled.
5. Use t
he Remote ID String field to specify the Remote ID String. The string can contain up
to 32 characters.
6. Click the Appl
y button. The updated configuration is sent to the switch. Configuration
changes take effect immediately.
7. Click the Cancel button
to cancel the configuration on the screen, and reset the data
displayed on the screen to the latest value of the switch.
To Next Page
Loading...
