D High-Speed Frame Capture: R
estrictions
The options available for image area vary with the frame advance rate.
[C30]: Choose from [FX (36×24)] and [DX (24×16)]
[C60]: The only option available is [DX (24×16)]
[C120]: The only option available is [FX (36×24)]
If a DX lens is attached when [C120] is selected, the release mode will change to [C60] and image
area will be fixed at [DX (24×16)].
Image quality is fixed at [JPEG/HEIF normal] and pictures are recorded in JPEG format.
Image size is fixed as follows.
[C30]/[C60]: [Large]
[C120]: [Small]
The options available for shutter speed vary with the frame advance rate.
[C30]/[C60]: ¹⁄₃₂₀₀₀–¹⁄₆₀s
[C120]: ¹⁄₃₂₀₀₀–¹⁄₁₂₅s
Exposure compensation is restricted to values between −3 and +3EV, although settings between −5
and +5EV can be selected.
The upper limit for ISO sensitivity is ISO 25600, even when higher values (Hi 0.3 through Hi 2.0) are
selected.
The option chosen for [Minimum shutter speed] will not apply if [ON] is selected for [ISO
sensitivity settings] > [Auto ISO sensitivity control] in the photo shooting menu.
High-speed frame capture cannot be combined with some camera features, including:
flexible program,
HLG tone mode,
photo flicker reduction,
flash photography,
bracketing,
multiple exposures,
HDR overlay,
interval-timer photography,
time-lapse video recording, and
focus shift.
Tip: High-Speed Frame Capture
Memory cards with a high write speed are recommended (
0 920).
137
Release Mode
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
To Next Page
Loading...
