Adjust settings for simultaneous wireless control of multiple remote
flash units. This option is available only when an SB‑5000 or SB‑500
flash unit or a WR‑R11a or WR‑R10 wir
eless remote controller is
mounted on the camera.
Option Description
[TTL] Flash output is adjust
ed automatically in response to shooting conditions.
[Auto external flash]
Light from the flash is reflected from the subject to an auto external flash
sensor and flash output adjusted automatically.
[Distance-priority
manual]
Choose the distance to the subject; flash output will be adjusted
automatically.
[Manual] Choose the flash level manually.
[Repeating flash]
The flash fires repeatedly while the shutter is open, producing a multiple-
exposure effect.
Wireless Flash Options
Option Description
Y
[Optical A
WL]
The r
emote flash units are controlled using low-intensity flashes emitted by
the master flash (
0 410).
Z
[Radio AWL]
The r
emote flash units are controlled by radio signals from a WR‑R11a/
WR‑R10 attached to the camera (
0 399).
[Off] Remote flash photography disabled.
463
Flash Control
To Next Page
Loading...
