High-Speed Frame Capture (C30/C60/C120)
For high-speed burst phot
ography at frame rates of 30, 60, or 120 fps, hold the c button and rotate
the main command dial to choose [C30], [C60], or [C120].
The maximum length for bursts taken using high-speed frame capture is approximately four
seconds.
The photos recorded may also include the final pictures from frames buffered while the shutter-
release button is pressed halfway (“Pre-Release Capture”); to choose how much of the buffer is
saved, use Custom Setting d3 [Pre-Release Capture options]. You can also limit the length of the
burst recorded after the shutter-release button is pressed all the way down (
0 588).
The t
ouch shutt
er can be used only to take one picture at a time. Use the shutter-release button for
high-speed frame capture.
136
Release Mode
To Next Page
Loading...
