Nikon Z8 - Page 706

Role Description
m
[White balance]
T
o choose a white balance option, hold the control and rotate
the main command dial. Some options offer sub-options that
can be selected by rotating the sub-command dial.
h
[Set Picture Control]
Press the control and rotate a command dial to choose a
Picture Control.
g
[Set Picture Control
(HLG)]
Press the control and rotate a command dial to choose an
HLG Picture Control.
y
[Active D-Lighting]
Press the control and rotate a command dial to adjust Active
D-Lighting.
h
[Skin softening]
Press the control and rotate a command dial to adjust skin
softening.
i
[Portrait impression
balance]
Press the control and rotate a command dial to choose a
portrait impression balance mode.
w
[Metering]
Press the control and rotate a command dial to choose a
metering option.
I
[Flash mode/
compensation]
Press the control and rotate the main command dial to choose
a flash mode and the sub-command dial to adjust flash
output.
v
[Release mode]
Hold the control and rotate the main command dial to choose
a release mode. Options for the selected mode, if any, can be
chosen by holding the control and rotating the sub-command
dial.
z
[Focus mode/AF-
area mode]
Hold the control and rotate the main command dial to choose
the focus mode, the sub-command dial to choose the AF-area
mode.
t
[Auto bracketing]
Press the control and rotate the main command dial to choose
the number of shots and the sub-command dial to select the
bracketing increment or Active D-Lighting amount.
632
f2: Custom Controls (Shooting)