Nikon Z8 - Page 708

Role Description
9
[ISO sensitivity]
Adjust ISO sensitivity either by holding the control and
rotating a command dial or by r
otating the lens control ring.
t
[Aperture (open)]
Rotate the lens Fn ring counterclockwise to widen the lens
aperture. This option is enabled automatically when [Aperture
(close)] is selected for [Lens Fn ring (clockwise)].
q
[Aperture (close)]
Rotate the lens Fn ring clockwise to narrow the lens aperture.
This option is enabled automatically when [Aperture (open)]
is selected for [Lens Fn ring (counterclockwise)].
i
[Exposure
compensation+]
Rotate the lens Fn ring clockwise for increased exposure
compensation. This option is enabled automatically when
[Exposure compensation−] is selected for [Lens Fn ring
(counterclockwise)].
h
[Exposure
compensation−]
Rotate the lens Fn ring counterclockwise to reduce exposure
compensation. This option is enabled automatically when
[Exposure compensation +] is selected for [Lens Fn ring
(clockwise)].
B
[ISO sensitivity
(increase)]
Rotate the lens Fn ring clockwise to increase ISO sensitivity.
This option is enabled automatically when [ISO sensitivity
(decrease)] is selected for [Lens Fn ring (counterclockwise)].
C
[ISO sensitivity
(decrease)]
Rotate the lens Fn ring counterclockwise to decrease
ISO sensitivity. This option is enabled automatically when
[ISO sensitivity (increase)] is selected for [Lens Fn ring
(clockwise)].
[None] The control has no effect.
634
f2: Custom Controls (Shooting)