Supported features
Camera modeling illumination
4
Unified flash control —
Camera flash unit firmware update
4
7
Not available with spot metering.
Can also be selected via the flash unit.
qA/A
mode selection is performed on the flash unit using custom settings.
Choice of qA and A depends on the option selected with the master flash.
Available only in i‑TTL, qA, A, GN, and M flash-control modes.
Available only in i‑TTL flash control mode or when the flash is configured to emit monitor
preflashes in qA or A flash control mode.
Firmware updates for the SB‑910 and SB‑900 can be performed from the camera.
836
Compatible Flash Units
1
2
3
4
5
6
7
To Next Page
Loading...
