D Metering Areas for FV Lock
The ar
eas metered when FV lock is used with optional flash units are as follows:
Stand-Alone
Flash control mode Metered area
i‑TTL 6-mm circle in center of frame
Auto aperture (qA)
Area metered by flash exposure meter
Remote
Flash control mode Metered area
i-TTL Entire frame
Auto aperture (qA)
Area metered by flash exposure meter
Non-TTL auto (A)
D Flash Compensation for Optional Flash Units
In i‑T
TL and auto aperture (qA) flash control modes, the flash compensation selected with the
optional flash unit or with [Flash control] in the camera photo shooting menu is added to the flash
compensation selected with the [Flash compensation] item in the photo shooting menu.
860
Compatible Flash Units
To Next Page
Loading...
