Tip: Exchanging Batteries While Shooting
When two b
atteries are inserted, you can replace the battery in ChamberA without turning the camera
off. You may find this useful when using the camera continuously for extended periods. Be careful not
to press the battery-holder latch and remove the battery holder while exchanging batteries.
Tip: Battery Order
If you ar
e using only one battery, it can be inserted in either chamber.
When two batteries are inserted, the battery in ChamberA will be used first. The camera will switch
to the battery in ChamberB when the battery in ChamberA is exhausted.
Tip: Compatible Batteries
EN‑EL15b and EN‑EL15a batteries can be used in place of the EN‑EL15c. Note, however, that fewer
pictures can be taken on a single charge than with the EN‑EL15c.
878
Optional MB-N12 Power Battery Packs