Notifier AFP-200 Installation Manual

Status Change Options Programming
AFP-200 PN 15511:H2 10/14/2002 93
3.5.2 Entering Status Change
For more information on
programming passwords, refer
to “Programming Passwords”
on page 66.
You access all Status Change options from the Status Change screen (Figure 84). From
the Program Entry screen (Figure 48 on page 66), enter your Status Change password to
display the Status Change screen (Figure 84).
Figure 84 Status Change Screen
Status Change operations (except for Walk Test) have a two-minute timer. (The Walk
Test feature has a 1-hour timer.) If no keys are pressed for two minutes, the control
panel exits Status Change and returns to normal operation.
STATUS@CHANGE@PRESS:
1=DISABLE@2=SENS/COMP
3=CLR@VER@4=CLR@HIST
5=TIME@6=WALK@TEST
Technical Manuals Online! - http://www.tech-man.com

Notifier AFP-200 Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Auxiliary Power Output	24 VDC, 500 mA
Operating Temperature	32°F to 120°F (0°C to 49°C)
Display	80-character LCD
Power Supply	120 VAC, 60 Hz
Capacity	198 addressable devices
Notification Appliance Circuits	2
Relay Contacts	3 (Form-C)
Relative Humidity	93% non-condensing