Enable IPv6
Introduction
IPv6 is an internet protocol that you can use.
You can enable IPv6 in the Océ Express WebTools. For more information on IPv6,
consult the Connectivity manual.
Note:
Make sure your configuration of all IPv6 related settings is correct.
Enable IPv6
1.
Go to 'Configuration' - 'Connectivity' 'TCP/IP: IPv6'.
2.
Click .
3.
Click 'Enabled'.
Chapter 4 - Define your workflow with the Océ Express WebTools 131
Enable IPv6
To Next Page
Loading...
Need help?
General
